Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the engine hood of the BMW 1 Series

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Checks and maintenance

Following these short and simple instructions, we will see how to open the hood of the BMW 1 Series. First, open the front door of the car, driver's side, and start pulling the hood release lever, located at the bottom near the pillar; then move to the front part of the hood to lift and open it, as shown in the video. At this point, raise the hood to a certain height, held by the hydraulic struts (or by fixing the rod if present); finally, lower the hood to close it again, letting it drop from a certain height.

Posted on 8 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of a BMW 1 Series
How to Open the Bonnet of a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Before you start, sit in the driver's seat of your BMW 1 Series. Begin by pulling the bonnet release lever located at the bottom right of the driver'…
How to Open the Bonnet of a BMW 1 Series
How to Open the Bonnet of a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) This brief and simple guide explains how to open the bonnet of the BMW 1 Series. First, get inside the vehicle and pull the lever located at the bott…
Guide to Removing the Engine on the BMW 1 Series F20 M135i
Guide to Removing the Engine on the BMW 1 Series F20 M135i
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this video tutorial, you will find the main instructions for removing the engine from the BMW 1 Series F20, in the M135i version. First, open the …

    Frequently Asked Questions

    • Serie 1 2011-2019 - What is the cost for a BMW 1 Series MOT? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos