Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What to do if we are unable to reset the brake light on a BMW vehicle

Model: BMW BMW Various
Part: Warning light – error code

In this video we can see what to do if we are unable to reset the brake pad warning light on a BMW car: the door must be closed or manually locked, and make sure the hood and trunk are properly closed. We will then find in the course of the video that it is also necessary to deactivate the handbrake button, or the reset will not be successful this time either. Then press the start button three times: this activates the diagnostic mode. Clear the messages with the BC button, holding it down. If the display continues to give the error message regarding the brake pads, by holding down this button, it will offer to reset. If we want to do this, press and hold down the BC button again.

Posted on 27 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Why Can't We Reset the Brake Pads on a BMW Vehicle?
Why Can't We Reset the Brake Pads on a BMW Vehicle?
BMW BMW Various The wear of the brake pads on any car, not just BMW, is indicated on the instrument cluster by the appropriate warning light, which is naturally illu…
How to Reset the Brake Fluid Warning Light on a BMW
How to Reset the Brake Fluid Warning Light on a BMW
BMW BMW Various In this video, learn how to reset the brake fluid replacement warning light on a BMW. It is advisable to perform this procedure only if the light rem…
How do you reset the brake light in BMW cars?
How do you reset the brake light in BMW cars?
BMW BMW Various The worn brake pads of a car are signaled by a warning light specifically for this purpose. The operation is simple, a sensor checks the height of th…

    Frequently Asked Questions

    • Bmw Vari - What does the DDE light mean in BMW cars? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos