Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Tail light bulb

Today, in a few simple steps, we will discover the procedure for disassembling and replacing the bulbs of the rear headlight of the BMW 1 Series. First, we open the rear hatch of the trunk and begin to unscrew the internal screw of the taillight, disconnecting the electrical connector located on the back to remove it; then we proceed to replace any faulty bulbs with new ones, removing them from the bulb holder, as shown in the video. At this point, make sure that the lights have the same fitting, checking their operation; after that, it will be possible to reassemble the taillight!

Posted on 3 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on the BMW 1 Series?
How to replace the headlight bulb on the BMW 1 Series?
BMW Serie 1 (2011-2019 / MK 2, F20, F21) To replace the headlight bulb on the BMW 1 Series, remove the inner cover of the wheel arch corresponding to the headlight containing the bulb to be …
How to Change the Front Headlight Bulb on a BMW 1 Series
How to Change the Front Headlight Bulb on a BMW 1 Series
BMW Serie 1 (2019-2026 / MK 3, F40) To change the front headlight bulb on a BMW 1 Series, switch off the vehicle and the lights, then open the bonnet. Locate the rear of the affected he…
How to replace the headlight bulb of the BMW 1 Series F20
How to replace the headlight bulb of the BMW 1 Series F20
BMW Serie 1 (2011-2019 / MK 2, F20, F21) If you want to find out how you can replace the headlight bulb of your BMW 1 Series F20, just pay attention to the procedure described below. First, …

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 1 2011-2019 - Cost of replacing rear light bulb on BMW 1 Series? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos