Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the internal roof lining of the BMW 3 Series.

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013

This short and simple guide will show us how to disassemble and replace the headliner or the interior lining of the roof of the BMW 3 Series. First of all, we get on board the car and start disassembling and removing the grab handles and sun visors, unscrewing the fixing screws; then we also remove the interior lights, disconnecting the electrical connector of the bulbs, as shown in the video. At this point, we detach the plastic side pillars and lever on the sides of the lining to detach it and remove it, carrying out the repair or directly the replacement!

Posted on 15 June 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Headliner of the BMW 3 Series
Removing the Headliner of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Follow these step-by-step instructions to remove and replace the headliner of the BMW 3 Series. First, get inside the cabin and start by removing the…
Removing and Replacing the Headliner of the BMW 3 Series
Removing and Replacing the Headliner of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, you will see the instructions that will allow you to remove and replace the headliner of the BMW 3 Series. First, get inside the vehicle and s…
How to Replace the Sunroof on a BMW 3 Series?
How to Replace the Sunroof on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the sunroof on a BMW 3 Series, you need to remove the headliner from inside the cabin. First, disconnect the courtesy light assembly and r…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos