Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you open the fuel tank of a BMW car?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Fuel cap

The refueling of a car requires a few minutes and no specific skill, in fact it can be considered within everyone's reach. For those who have doubts about how to do it, there is a video here that explains what to do, so let's move on to describe the necessary operations: We open the central locking, to which the fuel cap door is also connected, we push the fuel cap door and let it make a slight click outwards. At this point we grab it, open it and once we reach the aforementioned cap we unscrew it and proceed with refueling. At the end, we close everything.

Posted on 10 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace the Fuel Pump on BMW 3
Replace the Fuel Pump on BMW 3
BMW Serie 3 (2005-2013 / E91, E90, E92) How do you remove the damaged fuel pump? Let's take it out from inside the fuel tank in simple steps. Remove the rear seat cushions and locate the ac…
Guide to Removing the Fuel Tank of the BMW 3 Series
Guide to Removing the Fuel Tank of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In this guide, you will find the main instructions on how to remove and replace the fuel tank of the BMW 3 Series. First, lift the vehicle and start …
Remove the Fuel Tank on BMW 3 Series E30
Remove the Fuel Tank on BMW 3 Series E30
BMW Serie 3 (1982-1992 / E30) In today's video, you will see how to remove the fuel tank from a first-generation BMW 3 Series E30. First, lift the vehicle, using jack stands if ne…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos