Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the headrest of the BMW X5 E70

Model: BMW X5 E70 - Years 2007-2013
Part: Checks and maintenance

Let's see how to remove the headrests of the BMW X5: we need to go to the rear side of the front seat (driver or passenger) and remove the cover of the top part of the seat itself, at its rear. This can be done by levering with a plastic spatula and then removing the clips by pulling towards us. Once the top part is removed, we do the same with the bottom part of the seat cover, so we have plenty of space, now we see that the headrest is held by plastic clips with a metal lock on each side; we remove it and then remove the electrical connector located on one side of the headrest. At this point, we can pull it up from the top and we are done.

Posted on 11 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a BMW X5 E70
How to Replace the Cabin Air Filter on a BMW X5 E70
BMW X5 (2007-2013 / E70) The cabin air filter in your 2007-2013 BMW X5 E70 should be replaced periodically to maintain the air quality while using the air conditioning. Below…
Replacing Rearview Mirror Glass on BMW X5 E70
Replacing Rearview Mirror Glass on BMW X5 E70
BMW X5 (2007-2013 / E70) Today, you will learn how to remove and replace the glass of the external rearview mirror on a BMW X5 E70 second series. First, remove the mirror gla…
How to Manually Set the Time on the BMW X5 E70
How to Manually Set the Time on the BMW X5 E70
BMW X5 (2007-2013 / E70) If you have just replaced the battery in your BMW X5 E70 and the system time displayed is incorrect, you need to perform the following manual procedu…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos