Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to recline the rear seats of the BMW X5

Model: BMW X5 G05, G18 - Years 2019-2026
Part: Seat

The instructions in this guide will allow us to lower the backrests of the rear seats of the BMW X5, as well as the X3 and X1, in simple and quick steps. First, we open the rear doors of the car and start pulling the lever located on the top of the backrest, lowering the first section of the backrest; in the same way, we will lower the second section, as shown in the video. In this way, we will significantly increase the cargo volume of the trunk, finally restoring the positions of the backrests by raising them until they click into place.

Posted on 15 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing Rear Seats on BMW X5
Removing Rear Seats on BMW X5
BMW X5 (2007-2013 / E70) As shown in the video, to remove the rear seats, first take off the lower cover located in front of them, then remove the underlying T50 bolt. Additi…
How to Replace the Fuel Pump on a BMW X5
How to Replace the Fuel Pump on a BMW X5
BMW X5 (1999-2006 / E53) How to replace the fuel pump on a BMW X5? First, disconnect the battery cables. Then, remove the rear seat cushions (the pump is underneath). Use a s…
How to remove the rear bumper of the BMW X5
How to remove the rear bumper of the BMW X5
BMW X5 (2013-2018 / F15) Today's video will show us the steps on how to disassemble and replace the rear bumper of the BMW X5, following the instructions below. First, we ope…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos