Do it yourself
Frequently asked questions about cars and motorcycles

Removing Rear Seats on BMW X5

Model: BMW X5 E70 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Seat

See other generations:
Video tutorial

As shown in the video, to remove the rear seats, first take off the lower cover located in front of them, then remove the underlying T50 bolt. Additional T50 bolts are located at the back of the seat rail (these also have covers to remove).

That's it! This is all you need to do to remove the seats. When extracting them from the cabin, avoid bending them.

The best way is to extract the seats from the rear of the vehicle, so make space in the trunk. Reverse the process for installation.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

BMW X5 (2019-2026 / G05, G18) The instructions in this guide will allow us to lower the backrests of the rear seats of the BMW X5, as well as the X3 and X1, in simple and quick st…
BMW X5 (1999-2006 / E53) How to replace the fuel pump on a BMW X5? First, disconnect the battery cables. Then, remove the rear seat cushions (the pump is underneath). Use a s…
BMW X5 (1999-2006 / E53) You can remove the controls for the electric seat adjustment without taking the entire seat out of its place: simply remove the side plastic cover to…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos