Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Headrests on BMW X5

Model: BMW X5 F15 - Years 2013-2018
Part: Seat

Removing the headrests on BMW X5 is really simple, and in this short tutorial, you will learn how to do it. First, get a plastic trim tool to avoid damaging the seat fabric while you work. As you can see, the headrests are inserted into the seat thanks to the two columns: now, with the trim tool, pry under the right round plastic clip. Once this piece is lifted, remove the metal clip. At this point, press the button located at the base of the other column and pull the headrest upward, removing it from its seat. Done!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the headrest of the BMW X5
How to adjust the headrest of the BMW X5
BMW X5 (2013-2018 / F15) In the following article, we will see how to adjust the headrest of the seat of the BMW X5. This procedure takes a few seconds to be carried out and …
Removal of the headrest of the BMW X5 E70
Removal of the headrest of the BMW X5 E70
BMW X5 (2007-2013 / E70) Let's see how to remove the headrests of the BMW X5: we need to go to the rear side of the front seat (driver or passenger) and remove the cover of t…
Removing Headlight Bulbs on BMW X5
BMW X5 (2007-2013 / E70) Want to remove the front headlight bulbs? Let's see how to disassemble the front headlight of a BMW X5. Lift the hood, locate the inspection cover fo…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos