Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat on a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Seat

Here’s how to remove the front seat on a BMW 3 Series: Disconnect the power connectors (located in the trunk), move the seat back (using the electric buttons if available), and raise the seat cushion. Then, use a socket wrench to remove the fastening bolts located on the front rail. Move the seat forward using the adjustment buttons and remove the fastening pins from the rear of the rail. Finally, disconnect the power connectors for the front seat and reinstall the car seat by reversing the disassembly steps.

Updated on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Seat from a BMW 3 Series
How to Remove the Seat from a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Want to remove the front seat from a BMW 3 Series? Let's see how to take the seat out from inside the cabin. Move the seat forward or backward depend…
Remove the Front Seat of BMW E46
Remove the Front Seat of BMW E46
BMW Serie 3 (1998-2006 / E46) Want to remove the front seat of a BMW 3 Series? Here’s how to take it out from inside the cabin. Move the seat back (using the electric buttons if a…
How to Remove the Seat from BMW 3 Series
How to Remove the Seat from BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you remove the seat from the BMW 3 Series? Let's see how to take off the front seat from the sliding tracks. Move the seat back or forward usi…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos