Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the BMW X7

Model: BMW X7 G07, MK 1 - Years 2018-2026
Part: Front bumper

In this guide, we will see how to disassemble and replace the front bumper of the BMW X7. First, we open the hood of the car and start by removing the bumper grille, pressing on the upper plastic clips; then we proceed to unscrew all the fixing screws of the bumper, located on the top and bottom, as shown in the video. At this point, we unscrew the additional screws on both sides of the front wheel arches, detaching it on the sides until it is completely removed; if necessary, we replace it, fixing the bumper back on the bodywork.

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of a BMW X7
How to Remove the Front Door Panel of a BMW X7
BMW X7 (2018-2026 / G07, MK 1) Before you begin, open the front door of your Ford Fiesta. Start by prying and removing the door panel inserts with a thin but sturdy tool. Next, uns…
How to replace the cabin air filter of the BMW X7
How to replace the cabin air filter of the BMW X7
BMW X7 (2018-2026 / G07, MK 1) If you own a BMW X7 and are curious to discover how to correctly replace the cabin air filter, then all you need to do is carefully read the followin…
What is the Fuse Diagram for the BMW X7?
What is the Fuse Diagram for the BMW X7?
BMW X7 (2018-2026 / G07, MK 1) If one or more devices in your BMW X7 have suddenly stopped working, the first thing to do is check the status of the respective fuses, which are sho…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos