Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on a BMW Z4

Model: BMW Z4 E85, E86 - Years 2002-2008
Part: Headlight bulb

Let's see how to replace the headlight bulbs on a BMW Z4. Start by removing the plastic cover at the bottom of the splash shield using a suitable screwdriver to access the side headlight located in the bumper. After removing the bulb holder, take out the damaged bulb and install a new one (same size and voltage). Reinstall the plastic cover under the car's bumper with the attached clips. Test the lights to ensure they function correctly. Perform this replacement on the front headlights to maintain the same type of illumination.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear taillight of the BMW Z4
How to replace the rear taillight of the BMW Z4
BMW Z4 (2009-2016 / E89) In this guide, we will see the steps that will allow us to disassemble and replace the rear taillight and its bulbs of the BMW Z4. First, we open the…
How to replace the headlight bulb of the BMW Z4.
How to replace the headlight bulb of the BMW Z4.
BMW Z4 (2002-2008 / E85, E86) Replacing the headlight bulbs of the BMW Z4 model E85/E86 is a simple and quick task that can be done independently. To carry out the replacement, we…
How to Replace the Headlight Bulbs on a BMW Zeta 4
How to Replace the Headlight Bulbs on a BMW Zeta 4
BMW Z4 (2002-2008 / E85, E86) How to replace the headlight bulbs on a BMW Zeta 4. Start by removing the plastic cover at the bottom of the bumper with a suitable screwdriver to ac…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos