Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the BMW X3 located?

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Checks and maintenance

If you want to understand where the OBD port is located in your first-generation BMW X3, you just need to follow the steps described below. First, go to the driver's seat inside the vehicle, then shift your attention to the lower left side and locate the small protective cover present there. After that, remove it with your own hands and find the OBD port of your first-generation BMW X3. If you find it necessary, you can connect a diagnostic tool to it to analyze any errors detected by the control unit.

Posted on 6 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located on the BMW X3 E83?
Where is the OBD port located on the BMW X3 E83?
BMW X3 (2003-2010 / MK 1, E83) In the Mercedes X3 E83, the OBD port is located, like in any other vehicle, inside the cabin. In this particular car model, it is positioned under th…
How do you program the key for the BMW X3?
How do you program the key for the BMW X3?
BMW X3 (2017-2024 / MK 3, G01) In order to program the key of the BMW X3, you need to insert the blank key into the ignition lock: once this is done, you can connect a scanner to t…
Where can the visible fuse box of the BMW X3 model F 25 be found?
Where can the visible fuse box of the BMW X3 model F 25 be found?
BMW X3 (2010-2017 / F25, MK 2) Today we will show you the location of the fuse boxes on a BMW X3, model F 25 produced from 2011 to 2017. Inside the BMW X3 there are two fuse boxes.…

Other guides you may be interested in

    Frequently Asked Questions

    • X3 2010-2017 - How much does it cost to maintain the BMW X3 xdrive 2.0 d f25 annually? Read answer

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos