Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the SOS Module Battery in a BMW 2 Series?

Model: BMW Serie 2 F45 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

In this tutorial, you will see how to replace the battery in the SOS module of the BMW 2 Series, a very simple and quick operation. First, ensure that the vehicle is turned off for safety, then go to the rear and open the trunk.

Next, detach the upper seal, remove the two indicated clips, and separate the headliner from the roof. At this point, simply detach the SOS module, open the door containing the battery, install the replacement, and reassemble everything by following the reverse procedure.


Posted on 13 February 2026 by ScegliAuto


Related tutorials

How do you replace the battery of the BMW 2 Series?
How do you replace the battery of the BMW 2 Series?
BMW Serie 2 (2014-2021 / F45) The battery installed on the BMW 2 Series can be replaced by opening the hood, so that it is possible to locate the device inside the engine compartm…
How do you replace the battery of the BMW 2 Series?
How do you replace the battery of the BMW 2 Series?
BMW Serie 2 (2013-2021 / F22) To replace the battery of the BMW 2 Series, you need to open the hood so that you can locate the components inside the engine compartment: on the rig…
Guide to Replacing the BMW 2 Series Battery
Guide to Replacing the BMW 2 Series Battery
BMW Serie 2 (2014-2021 / F45) Today, let's go through the procedure to remove and replace the battery of the BMW 2 Series in simple and quick steps. First, open the hood of your c…

    Frequently Asked Questions

    • Serie 2 2014-2021 - Where is the battery of the BMW 218? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos