|
Do it yourself
| |||
| ||||
How to Replace the SOS Battery in the BMW 2 Series F46 Grand Tourer
Model: BMW Serie 2
F45
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
This operation can be done independently but requires attention, as the battery location varies based on options and production year: the most likely location for models from 2017 onwards is in the trunk, by removing the left side trim to access the compartment. However, it may also be located under the headliner near the shark fin antenna, as shown in the video. In this case, remove the rubber seal of the tailgate, take out the two plastic clips that secure the rear headliner, and lower it slightly: behind the first metal reinforcement bar, you will find the battery. The model needed for our F46 has the code 2 447 710, and it can be found on Amazon with the code B0D6WWGRNZ for $34.09 plus $2.30 shipping. The error message must be cleared using a BMW diagnostic tool.
Posted on 26 March 2026 by ScegliAuto
Related tutorials
BMW Serie 2
(2014-2021 /
F45)
In this tutorial, you will see how to replace the battery in the SOS module of the BMW 2 Series, a very simple and quick operation. First, ensure tha…
BMW Serie 2
(2014-2021 /
F45)
To replace the battery in a BMW 2 Series Active Tourer, open the hood to access the components in the engine compartment: in the upper right corner, …
BMW Serie 2
(2014-2021 /
F45)
On board the BMW 2 Series Active Tourer, you can replace the battery by opening the hood, so that you can access the components inside the engine com…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Reset the AdBlue Warning Light on a Peugeot Boxer
To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.044
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
