Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Shift Knob on a BMW X5

Model: BMW X5 F15 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Shift knob

See other generations:
Video tutorial

This guide shows you how to replace the automatic shift knob on your BMW. First, position the gear lever in neutral (N) and then turn off the vehicle. Now, grasp the shift knob and pull it firmly upward to detach it from the shaft (during this operation, remember to hold down the black lever on the knob).

Once removed, you can replace it with the new one by inserting the knob's pin back into the shaft; to secure the knob, give it a sharp tap until you hear a locking click.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Unlock the Automatic Transmission in a BMW X5?
How to Unlock the Automatic Transmission in a BMW X5?
BMW X5 (2013-2018 / F15) In this tutorial, you will see how to unlock the automatic transmission in a BMW X5. This is a simple operation to perform in order to shift into neu…
How to Replace the Automatic Shift Lever on the BMW X5 E70
How to Replace the Automatic Shift Lever on the BMW X5 E70
BMW X5 (2007-2013 / E70) This guide shows how to replace the automatic shift lever on the BMW X5 E70. The first step is to remove the trim plate around the shifter using a pl…
How to Manually Set the Time on the BMW X5 E70
How to Manually Set the Time on the BMW X5 E70
BMW X5 (2007-2013 / E70) If you have just replaced the battery in your BMW X5 E70 and the system time displayed is incorrect, you need to perform the following manual procedu…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos