Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Automatic Shift Lever on the BMW X5 E70

Model: BMW X5 E70 - Years 2007-2013
Part: Transmission

This guide shows how to replace the automatic shift lever on the BMW X5 E70. The first step is to remove the trim plate around the shifter using a plastic trim tool. Using a Torx T30 screwdriver, remove the four screws securing the shift lever and take out the assembly. At this point, disconnect the electrical cables for the lever and replace it with a new one. Reinstall the shift lever assembly in position and check the proper operation of the transmission before reinstalling the decorative cover. Finally, if everything works correctly, reinstall the trim plate.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Set the Time on the BMW X5 E70
How to Manually Set the Time on the BMW X5 E70
BMW X5 (2007-2013 / E70) If you have just replaced the battery in your BMW X5 E70 and the system time displayed is incorrect, you need to perform the following manual procedu…
How do you reset the automatic transmission of the BMW X5?
How do you reset the automatic transmission of the BMW X5?
BMW X5 (2007-2013 / E70) In order to reset the automatic transmission of the BMW X5, you need to insert the ignition key into the ignition switch, so that it can be turned: o…
How to Reset the Transmission on BMW X5 E70?
How to Reset the Transmission on BMW X5 E70?
BMW X5 (2007-2013 / E70) This very short video clearly shows the procedure to attempt to reset the transmission of your BMW X5 E70. The author clearly states that this is an …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos