Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in the BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: Service warning light

To correctly reset the service light in your BMW X1, the steps are very simple and quick. First, turn on the ignition. Next, as shown in the video, press the MENU button located near the gear lever, then use the arrows to navigate until you find the "vehicle status" option. Click on this option, and the "tire pressure" message will appear. Click again until you find the "pressure settings" option, press OK, and two messages will appear at the top: "reset" and "back". Click on RESET and wait for the reset to complete, and you're done.

Posted on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator of the 2014 BMW X1
How to reset the service indicator of the 2014 BMW X1
BMW X1 (2009-2015 / E84) To correctly complete the manual reset of the service light on your BMW X1 (2014), you must follow the steps described in the following guide. First,…
How to reset the service light on the 2020 BMW X1
How to reset the service light on the 2020 BMW X1
BMW X1 (2015-2022 / F48) Today we will explain how to reset the maintenance light on a 2020 BMW X1. Turn on the vehicle's instrument panel and press the button on the display…
How to Reset the Service Light on the BMW X1?
How to Reset the Service Light on the BMW X1?
BMW X1 (2009-2015 / E84) From the instrument cluster of the BMW X1, you can completely turn off the Service light by turning on the instrument cluster, inserting the ignition…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos