Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator on the BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: Service warning light

Manually resetting the service light on the dashboard of your BMW X1 f48 is really simple, and thanks to the procedure described in the following guide, you will be able to complete the operation without any difficulty. First, get into the car and reach the driver's seat, then insert the key and start the instrument panel. Once you have done this, locate the button located in the lower left corner of the dashboard and hold it down until a new screen appears. At this point, press the same button again and wait for the service light to be reset.

Posted on 27 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator of the 2014 BMW X1
How to reset the service indicator of the 2014 BMW X1
BMW X1 (2009-2015 / E84) To correctly complete the manual reset of the service light on your BMW X1 (2014), you must follow the steps described in the following guide. First,…
How to Reset the Service Light on a BMW X1
How to Reset the Service Light on a BMW X1
BMW X1 (2015-2022 / F48) To manually reset the service light on your BMW X1, only a few steps are needed. With the following method, you also do not need to use any diagnosti…
How to reset the service indicator on a BMW X1 F48 without i-drive
How to reset the service indicator on a BMW X1 F48 without i-drive
BMW X1 (2015-2022 / F48) In this video we see how to reset the service light on a BMW X1 F48 version without steering wheel controls i-drive: turn on the instrument panel, wi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos