Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a BMW 4 Series

Model: BMW Serie 4 G22, G23, G26, MK 2 - Years 2020-2026
Part: Service warning light

On the BMW 4 Series, the oil service reset is performed from the driver's seat using the digital instrument cluster. In the video, the car is shown with the ignition on and the engine off. The procedure starts by pressing the Start/Stop button without starting the engine to bring the system into ignition mode. At this point, on the BMW 4 Series, use the button on the instrument cluster (the one normally used to reset the trip odometer) and hold it until the service menu appears. The display shows a list of available maintenance items, including the oil service. The video shows the selection of the Oil Service item and the subsequent confirmation of the reset. Confirmation is done by holding the same button until the system completes the operation. Once finished, the display shows a message indicating the new maintenance interval, confirming that the reset was successful. After completing the procedure, simply turn off and turn on the ignition on the BMW 4 Series to verify that the oil change warning is no longer present.

Posted on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 4 (2013-2020 / F32, F36, MK 1, F33) Completing the manual reset procedure of the service light on the display of the instrument cluster of your BMW 4 Series F32 is really very simple. A…
BMW Serie 4 (2013-2020 / F32, F36, MK 1, F33) This tutorial shows you how to reset the brake service on the BMW 4 Series, a very simple and quick operation to perform only after completing the re…
BMW Serie 4 (2013-2020 / F32, F36, MK 1, F33) In this tutorial we can see how to reset the service in the BMW 4 Series, an extremely simple and fast operation, to be carried out only once all the…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos