Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Front Brake Rotors on BMW X5

Model: BMW X5 E53 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Brake rotors

See other generations:
Video tutorial

In this video, you will see how to replace the brake rotors on your impressive BMW X5 SUV. First, lift the vehicle and remove the wheels. Next, remove the brake caliper: use a flathead screwdriver to pry inside the caliper to loosen the spring.

Then, unscrew the two screws located at the back of the caliper (covered by two plastic caps). This will allow you to remove the clip on the front and take off the entire caliper.

At this point, just remove the screws holding the rotor in place, and you're done! If the screws are difficult to remove, remember to apply some penetrating oil.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

BMW X5 (1999-2006 / E53) This guide provides step-by-step instructions on how to replace your car's brake rotors. The braking system is crucial for the safety of the driver a…
BMW X5 (2007-2013 / E70) In this tutorial, you will see how to replace the headlight bulbs on a BMW X5, a very simple and quick operation. First, ensure the key is not in the…
BMW X5 (2013-2018 / F15) Let's see how to disassemble and remove the electronic parking brake button located on the center console of a BMW X5. Position the gear shift knob v…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos