Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulb on BMW X3

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Headlight bulb

Are the front headlight bulbs burnt out and need to be replaced? Let's see how to remove them on the X3 headlights. Open the hood by pulling the lever located at the bottom of the dashboard, and secure it with the prop rod. Lift the hood. Remove the front headlight cover with a screwdriver (located at the back of the headlight). Pull the socket out of the headlight and extract the damaged bulbs with the help of a screwdriver. Install the new bulbs (always the correct type and size) and insert the socket into the headlight housing. Reinstall the headlight cover on the X3. Replace the bulbs in the other headlight.

Updated on 18 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the headlight bulb of the BMW X3
How to replace the headlight bulb of the BMW X3
BMW X3 (2003-2010 / MK 1, E83) Today we will explain how to replace the headlight bulb of the BMW X3, model e83. We need to open the front hood and remove the headlight cap, discon…
Replacing the Position/Low Beam Bulb in a BMW X3 Headlight
Replacing the Position/Low Beam Bulb in a BMW X3 Headlight
BMW X3 (2003-2010 / MK 1, E83) In this short video tutorial, you will see the steps to remove and replace the headlight bulb, position light, and low beam, in a first-generation BM…
How to Change the Front Headlight Bulb on a BMW X3
How to Change the Front Headlight Bulb on a BMW X3
BMW X3 (2003-2010 / MK 1, E83) Replacing the front headlight bulb (H7 socket) on the passenger side is fairly simple, but you need to move the windshield washer reservoir to gain m…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos