Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : Replacing spark plugs on a BMW X3

BMW X3 - Video tutorial

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Spark plugs
Operation: Replacing spark plugs on a BMW X3

Replacing damaged spark plugs on a BMW X3? Let's see how they change. Let's open the engine compartment and lift the front hood, let's put it in safety. We remove the engine soundproofing panel, disassemble the air filter. We disconnect the battery terminals. We remove the coils on the engine head with a screwdriver or pliers; unscrew the candles with a socket wrench, pull them out of the head. We fit the spark plugs with the socket wrench extension into the cylinder head, tighten them and connect the power coils to each spark plug. We mount the air filter and the soundproofing panel of the BMW engine. We turn on and test the vehicle.


Posted on 7 December 2023 by ScegliAuto



Removing the spark plugs on BMW X3
BMW X3 (2003-2010 / MK 1, E83) .. Replacing spark plugs on a BMW X3? Let's see the disassembly and replacement. We raise the front hood,..
How do you replace the spark plugs on the BMW X3?
BMW X3 (2003-2010 / MK 1, E83) In order to replace the spark plugs on the BMW X3, the hood must be opened to gain access to the engine compartment and the plastic cover from the up
BMW X3 spark plug replacement
BMW X3 (2010-2017 / F25, MK 2) Replacing damaged spark plugs on a BMW X3? Let's see how they change. Let's open the engine compartment and lift the front hood, let's put it in safe

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos