Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the door panel of a BMW 3 Series. First, open the door and grab a plastic trim tool; then, detach the cover of the grab handle by prying at the seams, and remove the screws.

At this point, start to unclip the panel from the sides by prying at multiple points; once the panel is removed, disconnect the handle cable and the power window connector. Be careful not to damage the clips and all the hooks: if you do, replace them before reinstalling the panel.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to know the fuse diagram of a BMW 3 Series
How to know the fuse diagram of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…
Removing the Headliner of the BMW 3 Series
Removing the Headliner of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Follow these step-by-step instructions to remove and replace the headliner of the BMW 3 Series. First, get inside the cabin and start by removing the…
How to Remove the Rear Seats of the BMW 3 Series
How to Remove the Rear Seats of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today, let's go over the instructions for removing the rear seats and bench of the BMW 3 Series. First, open the rear doors and start by removing the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos