Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a BMW 1

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Door trim panel

Want to remove the door panel on a BMW 1? Let's see how to take off the protective cover. Detach the cover of the handle, unscrew the screws inside and those on top of the cover panel. Once the securing screws are removed, detach the locking clips. Pull the panel away with your hands and disconnect it from the door (disconnect the power wiring and the opening cable). Replace the panel if damaged or work inside the door. After reassembling the cover panel, test the operation of the door opening lever and the electric buttons.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel on BMW 1 Series
Removing the Door Panel on BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) Replace the door panel if it is damaged and cannot be repaired. Remove the internal handle cover. Use a screwdriver to remove the screws in the handl…
Removing the Door Panel on a BMW 1 Series
Removing the Door Panel on a BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this practical video tutorial, you will learn how to remove the driver's side door panel on a BMW 1 Series E87. First, open the door and use plast…
How to remove the door panel of a BMW 1 Series?
How to remove the door panel of a BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) To remove the door panel of a BMW 1 Series, start by removing the trim around the inner handle. Find and remove screws or bolts, then gently pry off …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos