Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Door Panel on BMW 1

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years 2004-2013
Part: Door trim panel

Replacing the door panel on a BMW 1 Series? Let's look at the removal process. Remove the cover of the internal handle (as shown in the video), and unscrew the screws inside. Remove the window switch panel and unscrew the remaining screws on the door panel, then detach the securing clips. Pull the panel away with your hands and disconnect it from the door (disconnect the power wiring and the opening cable). Carry out the desired maintenance inside the door. Refit the panel onto the car door: connect the electrical connectors, screw in the screws, and refit the switch panel. Finally, secure the cover of the handle.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel on the BMW 1 Series E87
How to Remove the Front Door Panel on the BMW 1 Series E87
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today, follow these steps to remove the front door panel on the BMW 1 Series E87. First, open the front door and start by removing the plastic cover …
How to Remove the Front Fog Light of the BMW 1 Series
How to Remove the Front Fog Light of the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Are the bulbs of the fog light blown? Here’s how to remove the fog light bulbs from a BMW 1 Series. Turn the front wheel inwards, locate the fog ligh…
How to Remove the Front Headlight of a BMW 1 Series
How to Remove the Front Headlight of a BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) Before you can start, open the bonnet of your BMW 1 Series. Begin by removing the front bumper, taking off the seal and unscrewing the relevant fixin…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos