Do it yourself
Frequently asked questions about cars and motorcycles

Location and Description of Fuses on BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Fuse box

Unlike most car models, the BMW 3 Series has only one fuse box: it is located in the glove compartment. Open the glove compartment and slightly unscrew the two locking clips. This will open the cover for the fuse box. To find the fuse you are looking for in case of an electrical failure, refer to the table shown in the video or the one that may be present on the back of the fuse box cover; otherwise, check the owner's manual. Some of the most sought-after fuses are number 8, which is for the cigarette lighter, and number 14, which is for the radio.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, we see the position of the fuses in the BMW 3 Series E90 version: we find the EOBD port inside the driver's side door, hidden by a sma…
BMW Serie 3 (2012-2019 / F30, F31) Want to know the location of the fuses on this vehicle? The description below provides the answer to our question. All fuses are located in three box…
BMW Serie 3 (1998-2006 / E46) Today we will see the diagram and positioning of the external fuses of the BMW 3 Series, in simple and quick steps. First of all, we open the hood of…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the cigarette lighter fuse of the BME 3 Series 318d e90? Read answer
    • Serie 3 1998-2006 - Where is the airbag fuse located on BMW 3 Series E46? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos