Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Battery

Before you begin, open the trunk of your BMW 3 Series. Start by removing the left inner side cover of the trunk. This will give you access to the battery. Next, unscrew and remove the bolts that secure the battery hold-down bracket. Then, loosen the nuts that secure the two terminals to the battery and disconnect them. Once you complete this step, you can remove the battery, finishing the disassembly. To install the new battery and close everything up, follow these instructions in reverse, and the replacement will be complete.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a BMW 3 Series
How to Replace the Battery in a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) How do you remove the power battery from a BMW 3 Series? Don't worry, let's see how to proceed. Before starting the disassembly, note that the batter…
How to Replace the Battery in a BMW 3 Series
How to Replace the Battery in a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) .. Here’s how to replace the battery in a BMW 3 Series: open the trunk of the car (in BMWs, the battery is located i.. …
Replacing the BMW 3 Series Battery
Replacing the BMW 3 Series Battery
BMW Serie 3 (2005-2013 / E91, E90, E92) In today's tutorial video, you will learn how to remove and replace the battery of the BMW 3 Series, as well as the 1 Series and 2 Series. First, loc…

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the battery of the BMW 3 Series located? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos