Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Battery

See other generations:
Video tutorial

How do you remove the power battery from a BMW 3 Series? Don't worry, let's see how to proceed. Before starting the disassembly, note that the battery in the BMW 3 Series is not located in the engine compartment but rather in the trunk.

Lift the trunk lid, remove the fabric cover from the right side trim of the trunk. You will find the battery that powers the entire electrical system of the car. Unscrew the securing bolts of the terminals with a socket wrench, and remove everything connected to the battery terminals.

Extract the battery using the plastic handle. Install a new battery by reversing the disassembly steps.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a BMW 3 Series
How to Replace the Battery in a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) .. Here’s how to replace the battery in a BMW 3 Series: open the trunk of the car (in BMWs, the battery is located i.. …
How to Replace the Battery in a BMW 3 Series
How to Replace the Battery in a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Follow these instructions to remove and replace the battery in a BMW 3 Series in simple and quick steps. First, locate the battery, which is found in…
Replacing the BMW 3 Series Battery
Replacing the BMW 3 Series Battery
BMW Serie 3 (2005-2013 / E92, E90, E91) In today's tutorial video, you will learn how to remove and replace the battery of the BMW 3 Series, as well as the 1 Series and 2 Series. First, loc…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the battery of the BMW 3 Series located? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos