Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Bulb on BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight bulb

Open the hood and insert the support rod. With the car off and the key removed, disconnect the battery by loosening the negative terminal. Remove the bolts for the front wheel near the affected headlight, then lift the car with a jack and remove the wheel. Remove all the 8 mm screws from the splash shield in the wheel well and take it off. Remove the six T20 Torx screws that secure the rear cover of the headlight, then lift the metal clip that holds the low beam LED in place and pull it out. After disconnecting it, replace the bulb. Reverse the steps for complete reassembly.

Updated on 5 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing the Low Beam Headlight Bulb on a BMW 3 Series
Replacing the Low Beam Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Here are the instructions to remove and replace the low beam headlight bulb on a BMW 3 Series. To access the low beam bulb, remove the plastic cover …
Replacement of the front headlight bulb of the BMW 3 Series
Replacement of the front headlight bulb of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Following these simple steps, we will see how to disassemble and replace the low beam or high beam bulb of the front headlight of the BMW 3 Series. F…
How to replace the front headlight bulb of the BMW 3 Series
How to replace the front headlight bulb of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) The steps to replace the left front headlight bulb of the BMW 3 Series are: - lift the vehicle; - remove the left front wheel; - remove the cover on …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos