Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of Central Console and Display on BMW 3 Series F30

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Onboard computer

See other generations:
Video tutorial

In this video tutorial, you will see the main instructions on how to disassemble and replace the onboard computer or display on a BMW 3 Series F30. First, get inside the car and remove the central plastic trim by disconnecting the electrical connector at the back; then, unscrew the screws located underneath to also remove the climate control buttons.

At this point, disconnect all the various wiring and finally remove the onboard computer; the video tutorial then illustrates the installation of the new upgraded display!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Removing the Trunk Lid Panel on BMW 3 Series F30
Removing the Trunk Lid Panel on BMW 3 Series F30
BMW Serie 3 (2012-2019 / F31, F30) In today's tutorial video, you will learn how to remove the trunk lid panel on a BMW 3 Series F30 by following these simple steps. First, open the tr…
How to Reset the Oil Light on BMW 3 Series F30
How to Reset the Oil Light on BMW 3 Series F30
BMW Serie 3 (2012-2019 / F31, F30) If the orange oil light on the instrument cluster of your BMW 3 Series F30 (2012-2019) stays on even after you have changed the oil, you need to perf…
Where to Find the Fuses in the BMW 3 Series F30
Where to Find the Fuses in the BMW 3 Series F30
BMW Serie 3 (2012-2019 / F31, F30) To locate the box containing all the fuses in your BMW 3 Series F30 (2012-2019), follow these instructions carefully. First, park your BMW 3 Series F…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos