Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: V-belt

Before starting, open the hood of your BMW 3 Series. Begin by unscrewing and removing the screws and bolts that secure the serpentine belt cover. This will give you access to the serpentine belt itself. Next, loosen the tensioner. At this point, the serpentine belt will be free, and you can remove it. Once you have completed this step, you will have finished the disassembly. To install the new belt and close everything up, simply follow these steps in reverse, and the replacement will be complete.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Serpentine Belt on a BMW 3 Series
How to Replace the Serpentine Belt on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Before you can start, open the hood of your BMW 3 Series. Then, unclip and remove the upper engine cover and the serpentine belt cover. Start by loos…
Replacing the Belt Tensioner on the BMW 3 Series E46
Replacing the Belt Tensioner on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you will see the main steps to remove and replace the belt tensioner on the BMW 3 Series E46. First, loosen the tensioner wit…
How to replace the water pump of the BMW Series 3 320D
How to replace the water pump of the BMW Series 3 320D
BMW Serie 3 (2005-2013 / E91, E90, E92) In this guide, we will see the main instructions on how to disassemble and replace the water pump of the BMW Series 3 320D. First, let's open the car…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos