Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on a BMW 3 Series E46

Model: BMW Serie 3 E46 - Years 1998-2006
Part: V-belt

In this video, see how to replace the serpentine belt on a BMW 3 Series E46: after opening the hood, remove the air filter and air duct; this will expose the serpentine belt. Unscrew the tensioner pulley to lift the belt, which you will then remove by prying from the top. In the diagram shown, see how to reinstall the new belt: it follows a rather winding path; pay attention to the direction the belt will turn. Remember to also replace the tensioner pulley, then reinstall the air filter, and the job is complete.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Serpentine Belt on a BMW 3 Series
How to Replace the Serpentine Belt on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Before you can start, open the hood of your BMW 3 Series. Then, unclip and remove the upper engine cover and the serpentine belt cover. Start by loos…
Replacing the Belt Tensioner on the BMW 3 Series E46
Replacing the Belt Tensioner on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you will see the main steps to remove and replace the belt tensioner on the BMW 3 Series E46. First, loosen the tensioner wit…
How to replace the timing belt of the BMW 3 Series
How to replace the timing belt of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) The replacement of the timing belt of the BMW 3 Series is necessary when the first noises start or when we reach the limit of kilometers traveled. Th…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos