Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Spark plugs

Lift the hood. First, remove the air filter box by unscrewing the 13 mm bolts. Disconnect the sensor connected to the other box, located on the right side of the car near the windshield, and remove the support plastics and the gasket. As shown in the video, take off all the plastics near the windshield to access the bolts behind the engine compartment. Remove the engine cover using a 5 mm Allen wrench. Disconnect the connectors and pull out the coils. Unscrew the six spark plugs and tighten the new ones to 17 lb-ft. Reassemble everything, and you're done.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on a BMW 5 Series F10
Where to Find the OBD Port on a BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) To locate the OBD port on your BMW 5 Series F10, follow the steps outlined in this guide. First, open the driver's door, then enter the vehicle and l…
What is the fuse diagram for the BMW 5 Series?
What is the fuse diagram for the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) The fuse diagram for the BMW 5 Series F10 and F11 is detailed in the owner's manual. If this is lost, refer to the diagram shown in the attached vide…
How to Remove the Front Passenger Seat from a BMW 5 Series
How to Remove the Front Passenger Seat from a BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Before you start, open the front passenger door of your BMW 5 Series. First, fully slide back the seat track covers. Next, remove the bolts that secu…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos