Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Position light replacement on BMW 320d

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Headlight
Operation: Position light replacement on BMW 320d

Today we will see how to change the headlight bulbs on BMW 320. Looking under the wheel arch for the relevant light you will notice that there is a flap to open: that is the door that leads to the light. Once the flap has been removed, unscrew the underlying cover as well. Put your hand in and look for the lamp holder to remove: unfortunately on this model the operation is done a little blindly, the lamp holder can be removed by unscrewing it by a quarter of a turn. If anything, help yourself with a fine tool. To facilitate processing and if possible, we recommend that you raise the car on a bridge and steer the wheels in order to have more room for maneuver.


Posted on 7 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the type of position light bulb on the BMW 3 Series E90? Read Answer
    • Serie 3 2012-2019 - Is it possible to remove the lens of the headlight of the BMW 3 series F31? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos