Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Headlight Conversion with Angel Eye Effect

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Headlight

See other generations:
Video tutorial

Open the hood and remove the mounting screw for the turn signal located along the inner edge of the fender. Then, detach the plastic cover just below the headlight, being careful not to damage the headlight washer system; remove the headlight mounting bolts (there are four) and pull it forward to extract it from its housing, disconnecting the corresponding plugs.

Once the headlight is on the bench, detach the gasket and the plastic tabs that secure the headlight glass. Then, apply the metal ring with the LEDs in front of the projectors and reassemble the headlight to install it back on the vehicle, making the necessary electrical connections.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

How to Install Angel Eyes Bulbs on the BMW 3 Series?
How to Install Angel Eyes Bulbs on the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To install the angel eyes bulbs on the BMW 3 Series, open the hood and remove the bolt located on the top of the headlight that contains the turn sig…
Replacing Angel Eye Bulb on BMW 3 Series E90
Replacing Angel Eye Bulb on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In today's tutorial video, you will learn how to remove and replace the angel eye headlight bulb on a BMW 3 Series E90. To access the headlight bulb,…
Installing LED Angel Eyes Bulb in Front Headlights
Installing LED Angel Eyes Bulb in Front Headlights
BMW Serie 3 (1998-2006 / E46) To install the ANGEL EYES bulb kit in the headlights, you must completely remove the front light assembly. Obtain the kit and start with the plastic …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos