Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Left Handle Frame on a BMW Z3

Model: BMW Z3 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Handle

Video tutorial

Before you can start, open the left door of your BMW Z3. Begin by prising off the cap on the side of the door using a flathead screwdriver. Next, unclip the clips that secure the handle frame to the door.

By doing this, you will free the frame itself. At this point, unclip and remove the handle frame, completing the disassembly.

To fit the new frame, follow these steps in reverse, and you will have completed the replacement.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Removal of the Left Front Door Panel of a BMW Z3
Removal of the Left Front Door Panel of a BMW Z3
BMW Z3 (1995-2002 / MK 1) Remove the left front door panel of a BMW Z3. Disconnect the battery terminals located in the engine compartment, and using a lever, detach the trim …
How to replace the exterior door handle of the front door of the BMW Z3.
How to replace the exterior door handle of the front door of the BMW Z3.
BMW Z3 (1995-2002 / MK 1) Today's instructions will illustrate the procedure for disassembling and replacing the external door handle of the BMW Z3. First, let's open the fron…
Removing the Door Panel on a BMW Z3
BMW Z3 (1995-2002 / MK 1) Remove the front left door panel on a BMW Z3. Use a screwdriver to remove the trim around the upper door handle. Take out the switch panel from the d…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos