Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Headrest on BMW X3

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Seat

The tutorial starts with the seat already removed from the vehicle, but this does not matter. The first step to remove the headrest (in the video, it is a front passenger seat) is to remove the rear seat panel and disconnect its internal cable. Then, using a plastic trim tool (to avoid damaging the seats), pry under the right round clip of the headrest to lift it, and with a flat screwdriver, remove the metal clip. Now, for the other headrest clip, press the button and remove it as well. Bye!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW X3 (2003-2010 / MK 1, E83) In this guide, we will see the instructions that will allow us to disassemble and remove the front headrest of the BMW X3. First, we get on board the…
BMW X3 (2017-2024 / MK 3, G01) In this video tutorial we will explain how to make the best use of the trunk space of the BMW X3. The rear seats for this car model can be completely…
BMW X3 (2017-2024 / MK 3, G01) Before you start, open the hood of your BMW X3. First, unscrew and remove the rear cover of the burnt-out bulb. Next, disengage the burnt-out bulb an…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos