Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel on the BMW X3 F25 MK3

Model: BMW X3 MK 2, F25 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

In this video, we see the instructions that will allow us to remove the front door panel on the BMW X3 F25, second generation, in simple steps. First, open the front door of your car and start by removing all the plastic covers on the panel; disconnect the various electrical connectors for the switch panel and speakers, unscrewing all the fastening screws located underneath, as shown in the video.

At this point, start prying on the sides of the panel to release it, disconnecting the handle cable found at the back!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Remove the Inner Door Panel of the BMW X3 F25
How to Remove the Inner Door Panel of the BMW X3 F25
BMW X3 (2010-2017 / MK 2, F25) This guide shows how to remove the inner door panel of the BMW X3 F25. First, unscrew the 5 Torx T20 screws located at the bottom of the panel, behin…
How to disassemble the front door panel of the BMW X3
How to disassemble the front door panel of the BMW X3
BMW X3 (2010-2017 / MK 2, F25) Today we will see the necessary instructions in order to disassemble and replace the front door panel of the BMW X3. First, we open the front door of…
How to Remove the Interior Door Handle of a BMW X3
How to Remove the Interior Door Handle of a BMW X3
BMW X3 (2010-2017 / MK 2, F25) Before you can start, open the door of your BMW X3. Begin by prying off and removing the cover near the interior door handle, then remove the cover o…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos