Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Door Panel of the BMW X3 F25

Model: BMW X3 MK 2, F25 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

This guide shows how to remove the inner door panel of the BMW X3 F25. First, unscrew the 5 Torx T20 screws located at the bottom of the panel, behind the small speaker near the lock lever and behind the trim panel of the door handle. To access these last two recesses, use a plastic trim tool.

Pry at the edges of the panel to detach the retaining clips and lift the panel to remove it. Be careful of the electrical wires. After disconnecting the speaker's electrical connector, the power window control cable, the lock rod, and the lock control cable, you can remove the door panel.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel on the BMW X3 F25 MK3
Removing the Front Door Panel on the BMW X3 F25 MK3
BMW X3 (2010-2017 / MK 2, F25) In this video, we see the instructions that will allow us to remove the front door panel on the BMW X3 F25, second generation, in simple steps. First…
How to Replace the Outside Rearview Mirror on the BMW X3 F25
How to Replace the Outside Rearview Mirror on the BMW X3 F25
BMW X3 (2010-2017 / MK 2, F25) You can perform a DIY replacement of the outside rearview mirror on a BMW X3 F25 if you have a bit of patience and time to dedicate. The operation it…
Where is the fuse box of the BMW X3 F25 located?
Where is the fuse box of the BMW X3 F25 located?
BMW X3 (2010-2017 / MK 2, F25) Locating the box containing all the fuses of your BMW X3 F25 is really simple. All you have to do is read the following guide and follow step by step…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos