Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Seat Belt from BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the seat belt from a BMW 3 Series E90 in simple steps. First, open the front door and remove the plastic cover located at the bottom of the seat; this will give you access to the bolt for the seat belt bracket, which you will then remove.

Next, disconnect the electrical connector found under the seat; then, remove the seat belt attachment by taking out the fastening bolt and disconnecting the electrical connector as shown in the video!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

How to Remove the Seatbelt from a BMW 3 Series
How to Remove the Seatbelt from a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video, see how to remove the seatbelt along with the retractor from a BMW 3 Series. Gather various levers, screwdrivers, and wrenches or sock…
Removing the Front Seat of a BMW 3 Series
Removing the Front Seat of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Is the front seat of your BMW 3 Series due for a change? Here’s how to remove it. Remove the securing screw located under the seatbelt. Move the seat…
Guide to replacing the rear seat belt of the BMW 3 Series
Guide to replacing the rear seat belt of the BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Below we will see the main instructions on how to disassemble and replace the rear seat belt of the BMW 3 Series. First, we open the rear doors of th…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos