Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seatbelt from a BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Checks and maintenance

In this video, see how to remove the seatbelt along with the retractor from a BMW 3 Series. Gather various levers, screwdrivers, and wrenches or sockets. Use a plastic lever to remove the upper and lower side trim where the seatbelt retractor is located; remove the plastic cover from the front seat. Use a socket wrench to unscrew the fastening bolt located in the front seat of the seatbelt, and remove the seatbelt retractor along with its feed clamp. Finally, install the new seatbelt retractor with the necessary mounting parts.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Seat of a BMW 3 Series
Removing the Front Seat of a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Is the front seat of your BMW 3 Series due for a change? Here’s how to remove it. Remove the securing screw located under the seatbelt. Move the seat…
How to Replace the Seat Belt in a BMW 3 Series?
How to Replace the Seat Belt in a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To replace the seat belt in a BMW 3 Series, remove the plastic covers from the door pillars, both at the top and bottom. Under the cover at the top, …
How to Remove the Passenger Seat Belt in a BMW 3 Series?
How to Remove the Passenger Seat Belt in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to remove the passenger seat belt in a BMW 3 Series, a very simple operation. First, move the seat all the way for…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos