Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear light on the BMW X1?

Model: BMW X1 F48 - Years 2015-2022
Part: Tail light

How do you replace the rear light on the BMW X1? First lift the tailgate of the rear trunk. Position yourself on the side, next to the lighthouse, and start by unscrewing the fixing screw of the panel that covers the lighthouse. Now remove the fixing nuts of the headlight and slide, with a slight movement, pushing the headlight outwards, the same out of its seat. Disconnect the electrical connectors that carry voltage to the headlight bulbs and disconnect the lamp assembly. Now replace the headlight with a new one and repeat the previous operations in reverse order.

Posted on 7 October 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulb on the BMW X1?
How to replace the rear light bulb on the BMW X1?
BMW X1 (2015-2022 / F48) In order to replace the rear light bulb on the BMW X1, you have to lift the plastic cover immediately next to the light. To remove it, it will be nec…
How to remove the rear light of the BMW X1
How to remove the rear light of the BMW X1
BMW X1 (2009-2015 / E84) The guide shows how to remove the rear light of the BMW X1. To complete this operation it is necessary to open the luggage compartment and remove the…
How to change the light bulb in the BMW X1?
How to change the light bulb in the BMW X1?
BMW X1 (2015-2022 / F48) To replace the headlights bulbs on the BMW X1, it is not necessary to remove the entire headlight assembly. The replacement can be done by reaching i…

Other guides you may be interested in

How to Fit Seat Covers on a Renault Clio

How do you fit seat covers on your Renault Clio? Watch this video for guidance. First, move the seat forward and raise the seat base, then remove the headrest from the backrest. Slide the seat cover from the top down over the backrest, removing any controls on the side of the seat if necessary by pulling them towards you. After fitting the upper seat cover, ensure it is around the headrest seals. Fit the lower seat cover on the base, pull the springs with the metal clips and secure them. Use plastic spatulas to assist with the fastening.

Watch the video!


by ScegliAuto

More videos