Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight Bulb in a BMW X1?

Model: BMW X1 F48 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Light bulb

See other generations:
Video tutorial

To replace the headlight bulbs in the BMW X1, you do not need to disassemble the entire headlight assembly. You can perform the replacement by reaching into the engine compartment after opening the hood to access the rear cover of the headlight.

This cover must be removed; otherwise, you cannot access the bulb socket. Once the cover is removed, pull out the bulb socket you need and replace the burnt-out bulb with a new one. The type of bulb required is specified in the vehicle's manual.

If you have lost it, you can go to an auto parts store with the old bulb and show it to purchase a new one with the same specifications.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb in a BMW X1?
How to Replace the Headlight Bulb in a BMW X1?
BMW X1 (2009-2015 / E84) Replacing the headlight bulb in the BMW X1 E84 is a straightforward task. First, access the wheel well on the side where you will replace the bulb an…
Replacing the Headlight Bulb on the BMW X1 E84
Replacing the Headlight Bulb on the BMW X1 E84
BMW X1 (2009-2015 / E84) In today's tutorial video, you will learn how to remove and replace the headlight bulb on the BMW X1 E84, first generation, by following these simple…
How to Install the Light in the Glove Compartment of the BMW X1
How to Install the Light in the Glove Compartment of the BMW X1
BMW X1 (2022-2026 / U11) Today, you will learn how to install the bulb in the glove compartment of the BMW X1. To install the bulb, there is no need to connect any internal e…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos