Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Boot of a BMW 1 Series When It Is Locked?

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

To open the boot of a BMW 1 Series when it is locked, lower the lever that allows you to tilt the rear seats for access to the boot from inside. You will find a small cover that needs to be removed; attached to this cover is a cord that must be pulled.

Pulling this cord will unlock the boot, allowing you to open it from the outside. After unlocking, reposition the cord in its housing and raise the seats again.

It is advisable to replace the battery if the boot does not open in the usual manner.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

BMW Serie 1 (2011-2019 / F21, MK 2, F20) In the BMW 1 Series, it can happen that the boot lid gets stuck, for example, due to a problem with the control button or the lock actuator. In these…
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In the BMW 1 Series, it may happen that the boot lid gets jammed, for example, due to a problem with the release button or the lock actuator. In thes…
BMW Serie 1 (2011-2019 / F21, MK 2, F20) The opening of the rear tailgate of the BMW 1 Series, to be clear the luggage compartment, is very convenient, in fact being a loading compartment, i…

    Frequently Asked Questions

    • Serie 1 2011-2019 - What is the cost for a BMW 1 Series MOT? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos