Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Bumper Removal for BMW X1 E84

Model: BMW X1 E84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Front bumper

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove the front bumper from a BMW X1 E84. First, open the hood of the car and use a Torx wrench to unscrew all the fastening screws located above the front bumper; then unscrew the additional fastening screws found underneath the bumper.

At this point, remove the plastic clips located on both sides of the fenders and start to detach the bumper from the sides: disconnect the connectors at the back of the bumper and gently remove it, as shown in the video!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb on the BMW X1 E84
Replacing the Headlight Bulb on the BMW X1 E84
BMW X1 (2009-2015 / E84) In today's tutorial video, you will learn how to remove and replace the headlight bulb on the BMW X1 E84, first generation, by following these simple…
Where to Find the Fuse Box of the BMW X1 E84
Where to Find the Fuse Box of the BMW X1 E84
BMW X1 (2009-2015 / E84) In this new mini guide for your BMW X1 E84 (model years 2009-2015), find out where all the various fuses of the vehicle are located. Once found, you …
Removing the Windshield Washer Reservoir on BMW X1 E84
Removing the Windshield Washer Reservoir on BMW X1 E84
BMW X1 (2009-2015 / E84) In today's video, you will see how to remove the windshield washer reservoir and its pump on a BMW X1 E84 in simple steps. First, lift the vehicle on…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos