Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuse Box of the BMW X1 E84

Model: BMW X1 E84 - Years 2009-2015
Part: Fuse box

In this new mini guide for your BMW X1 E84 (model years 2009-2015), find out where all the various fuses of the vehicle are located. Once found, you can directly and effectively address any electrical issues with the car. First, reach the passenger seat and fully open the glove compartment. Once done, disengage the right side safety latch and remove it completely. At this point, locate the fuses of your BMW X1 E84 and you're done. Disconnect the battery before working on them.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box on a BMW X1 E84
BMW X1 (2009-2015 / E84) If you're looking for the fuse box in your BMW X1 E84 but haven't found it yet, this guide is all you need. Let's find out where it's located. First,…
Where is the Fuse Box in the BMW X1?
Where is the Fuse Box in the BMW X1?
BMW X1 (2009-2015 / E84) In this video, see where the fuse box is located in the first generation BMW X1 E84. This operation is necessary if you need to replace one or more f…
Where is the fuse box located in the BMW X1?
Where is the fuse box located in the BMW X1?
BMW X1 (2009-2015 / E84) The BMW X1 model e84 has two fuse boxes inside. The first fuse box is located inside the cabin, specifically behind the passenger side glove compartm…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos