Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Windshield Washer Reservoir on BMW X1 E84

Model: BMW X1 E84 - Years 2009-2015

In today's video, you will see how to remove the windshield washer reservoir and its pump on a BMW X1 E84 in simple steps. First, lift the vehicle on the front right side and remove the wheel; then, unscrew the fasteners of the wheel well using 3.5, 8, and 10 mm wrenches and a T27 Torx screwdriver. At this point, disconnect the washer reservoir hose, allowing all the fluid to drain; remove the washer pump by disconnecting the electrical connector, and then extract the entire reservoir as shown in the video!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you access the brake fluid reservoir on a BMW X1 E84?
How do you access the brake fluid reservoir on a BMW X1 E84?
BMW X1 (2009-2015 / E84) In this video we can see how to find the brake fluid reservoir inside the engine compartment of a BMW X1 E84 version. It is located on the left side …
Removing Radiator Reservoir on BMW X1
Removing Radiator Reservoir on BMW X1
BMW X1 (2009-2015 / E84) Removing the coolant reservoir on the BMW X1. Let's see how to remove it from the engine compartment. Open the car door and pull up the hood release …
Where to Find the Fuse Box of the BMW X1 E84
Where to Find the Fuse Box of the BMW X1 E84
BMW X1 (2009-2015 / E84) In this new mini guide for your BMW X1 E84 (model years 2009-2015), find out where all the various fuses of the vehicle are located. Once found, you …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos