Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Radiator Reservoir on BMW X1

Model: BMW X1 E84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

See other generations:
Video tutorial

Removing the coolant reservoir on the BMW X1. Let's see how to remove it from the engine compartment. Open the car door and pull up the hood release lever located at the bottom left of the dashboard, then lift the front hood.

Empty the reservoir of the existing fluid, then use a socket wrench or screwdriver to unscrew the mounting bolts. Disconnect all the circulation hoses from the reservoir (remove it from the engine compartment).

Install a new reservoir and secure the bolts, reconnect the circulation hoses. Refill the new coolant in the cooling system.

Test the operation of the cooling circuit.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Removing the Windshield Washer Reservoir on BMW X1 E84
Removing the Windshield Washer Reservoir on BMW X1 E84
BMW X1 (2009-2015 / E84) In today's video, you will see how to remove the windshield washer reservoir and its pump on a BMW X1 E84 in simple steps. First, lift the vehicle on…
How to Refill Water on a BMW X1
How to Refill Water on a BMW X1
BMW X1 (2015-2022 / F48) How to refill water on a BMW X1? Let's see how to proceed. Pull the plastic lever located at the bottom left of the dashboard, lift the hood, and sec…
How to Top Off Antifreeze in BMW X1
How to Top Off Antifreeze in BMW X1
BMW X1 (2015-2022 / F48) The coolant cap is located near the radiator. Next to it, there is also the reservoir for filling with the appropriate "min-max" scale. To top off, s…

Other guides you may be interested in

    Frequently Asked Questions

    • X1 2023-2030 - Where is the spare wheel on the BMW X1 located? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos