Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Refill Water on a BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: Checks and maintenance

How to refill water on a BMW X1? Let's see how to proceed. Pull the plastic lever located at the bottom left of the dashboard, lift the hood, and secure it. Next, locate the radiator fluid refill cap and remove it by hand (unscrew it). Use a funnel to refill the radiator with coolant, then close the reservoir cap; close the hood after maintenance (check the levels of other fluids). Test the correct operation of the maintenance performed by starting the engine.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Fuel Door on a BMW X1
BMW X1 (2015-2022 / F48) This guide shows you how to open the fuel door on a BMW X1 by following these simple and quick steps. First, take your remote and unlock the vehicle …
How to Open the Fuel Door on the BMW X1-X2-X3
How to Open the Fuel Door on the BMW X1-X2-X3
BMW X1 (2015-2022 / F48) In this short video, discover how to open the fuel door and cap on the BMW X1 F48, as well as on the X2 and X3 second generation, by following these …
When to Change the Timing Chain on a BMW X1
When to Change the Timing Chain on a BMW X1
BMW X1 (2015-2022 / F48) The timing belt is a crucial component of the vehicle as it regulates the operation of the crankshaft with the camshaft. The camshaft is essential fo…

Other guides you may be interested in

    Frequently Asked Questions

    • X1 2023-2030 - Where is the spare wheel on the BMW X1 located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos